Roof Corner Connector - 4-Way - 20mm diameter
The Roof Corner Connector is the bracket located at either of the four top corners of the frame on many self-assembly gazebos. It is used to join together three roof poles and the leg pole.
Slotted arms: No
Height: 100mm (measured vertically in upright position)
Width: 110mm (measured left-to-right in pictures 2 and 3)
Depth: 70mm (measured horizontally in upright position)
Centre socket inner diameter: 20mm
Side socket inner diameter 20mm
Bottom socket inner diameter 20mm
Side socket angle: 90 degrees right-angle (to fit a square or rectangular gazebo)
Bottom socket angle: Slightly over 90 degrees (to fit a sloped-leg gazebo)
Argos 2.7m x 2.7m Self-assembly Gazebo
2011 - 2014: Catalogue no. 650/2777
2011 - 2014: Catalogue no. 650/2210
Homebase "Arran" 2.7m x 2.7m Self-assembly Gazebo
2010 - 2014: Catalogue no. 098655
May be compatible with other makes, models and sizes
This item weighs 50g.
To see postage rates please click here.
May also be known as: Part IV, Corner Bracket, Top Joint, Joining Bracket, 4-pronged Connector
Item No: GSP47
We Also Recommend
Delivered quickly and exactly as described, the part fitted without issue and is as good as the original part it replaced.
Great place to buy spares for your gazebo at a reasonable price
Bought both 19mm and 20 mm corner connectors as not sure of my fit, so cheap it doesn’t matter if one is surplus to requirements. Excellent service and arrived earlier than anticipated.
Service and delivery excellent. The product however, I found to be thin plastic and not thick enough to withstand movement of a gazebo where there is a gust of wind. It really puts strain on this connector and after a while the tube edges, where the poles insert, start to crack. If only these were made of thicker, more robust material, like the original parts were.
We were extremely happy with the speed of service and will definitely use you again if we need to.